Flo-0006GOscoped

Ben Smith

1847 Fillmore St NE, Minneapolis

Sales rep: BenPhone: 763-568-8937Email: smithben1983@gmail.comScoped: Apr 21, 2026, 12:38 AM

No Drive folder

Flo's scope

Access type

—

Cleanout type

—

Total length

66 ft

Overshot / seal

— / —

Pipe segments

0–6 ft · 4 inch · cast iron
6–66 ft · 6 inch · clay

Liner plan

Option A — Stretch liner: Single pull, handles 4"→6" transition on its own. Preferred for simplicity. Confirm footage add-on percentage with install team lead before ordering. Option B — Scrim + transition liner 15/85/3: 15 ft of 4", 3 ft transition, 85 ft of 6". Covers the 6 ft cast iron section and 60 ft clay section with buffer for bend pullback at 60 ft.

Pre-job steps

Floor Break Up (FBU): No Descaling: No Jetting: No

Heads-up

None

Job ticket

Job Ticket — Marvel Sewer & Drain
Date Scoped: 2025-07-11
Sales Rep: Ben

CUSTOMER
Name: Ben Smith
Address: 1847 Fillmore St NE
Phone: 763-568-8937
Email: smithben1983@gmail.com

PIPE LAYOUT
0–6 ft: 4 inch cast iron
6–66 ft: 6 inch clay
Total Length: 66 linear feet
Main Connection: Wye into 6"–9" main (verify size on site)

LINER PLAN
Option A — Stretch liner: Single pull, handles 4"→6" transition on its own. Preferred for simplicity. Confirm footage add-on percentage with install team lead before ordering.
Option B — Scrim + transition liner 15/85/3: 15 ft of 4", 3 ft transition, 85 ft of 6". Covers the 6 ft cast iron section and 60 ft clay section with buffer for bend pullback at 60 ft.

BENDS
Count: 2
Details: 22.5° at 4 ft, 22.5° at 60 ft — both mild, well-positioned near ends of run

PIPE CONDITIONS / DAMAGE
Root intrusion (minor) from 6–40 ft — cleared by Flexshaft on liner day, standard prep

WORK SCOPE
Liner Start: 4 ft from access (remote start covers 0–4 ft, cut out after cure)
Liner End: 66 ft — stops at main
Patches: None
Overshot Cutback: No

ACCESS
Type: Floor cleanout
Cleanout Type: Sweep
Notes: Easy access

PRE-JOB REQUIREMENTS
Floor Break Up (FBU): No
Descaling: No
Jetting: No

GROUND CONDITIONS
Large driveway, trailer within 100 ft — no parking issues

VIDEO LINK
https://drive.google.com/file/d/1ES4mrGQxubGmXTTSZKJNRY9lvFLbNq4D/view?usp=drivesdk

FLO ASSESSMENT
Verdict: GO
Flags: None
Summary: Straightforward 66 LF transition run from 4" cast iron into 6" clay with a wye connection at the main. Minor roots from 6–40 ft get cleared by Flexshaft on liner day — no separate pre-job needed. Laundry tie-in at 2 ft is fully protected by the remote start section, which gets cut out after cure — no reinstatement required. Two mild 22.5° bends at each end of the run, no concerns.

PERMIT REQUIREMENTS
City: Minneapolis (verify — address is NE, confirm jurisdiction)
Permit Type: Minneapolis Sewer Permit
How to Apply: Verify with office
Cost: $160.00
Inspection Process: Verify with office
Road Patch Requirement: N/A
Road Closure: N/A
I&I Program: N/A
Notes: If any work enters the ROW, a separate Minneapolis ROW Excavation Permit ($800) would apply — not anticipated for this no-dig liner job.

HEADS UP — INSTALL TEAM ATTENTION
None

ADDITIONAL NOTES
• Install team: Confirm clay pipe size after the cast iron section before pulling liner. Usually 6" but occasionally 4" or 5" — quick check saves a wasted liner.
• Tie-in at 2 ft (laundry): remote start covers 0–4 ft. Clog Dog cuts it out post-cure. Tie-in stays fully open — no reinstatement needed.
• Liner footage corrected from 62 LF (as proposed) to 66 LF — full run billed from cleanout.

Install feedback (0)

No feedback submitted yet.

Flo conversation (scoping)

Flo

Hi! I'm Flo. Map the pipe layout on the left and click "Scope with Flo" — or just describe the job here and I'll guide you through.

You

Here are the job details I have so far: Customer: Ben Smith Address: 1847 Fillmore St NE Phone: 7635688937 Email: smithben1983@gmail.com Sales Rep: Ben Pipe Layout (access point → main connection): 0' to 6': 4 inch cast iron 6' to 66': 6 inch clay Total Length: 66 linear feet Pipe Conditions: Root intrusion (minor — worst case) at 6-40 ft Bends: 22.5° at 4 ft from access 22.5° at 60 ft from access Tie-in Laterals (observed during camera): 4" tie-in at 2 ft — Laundry Proposed Scope (what was sold): Liner : 4' to 66' (62 LF) Main Connection: Wye Main Size: 6"-9" (approx) Ground Conditions: Trailer within 100ft: Yes. Parking: Largbe driveway Video Link: https://drive.google.com/file/d/1ES4mrGQxubGmXTTSZKJNRY9lvFLbNq4D/view?usp=drivesdk Please assess this job and let me know if you need any additional information.

Flo

Customer info looks clean. Let me dig into the pipe layout and scope. A couple things to sort out before I can give you a verdict: 1. The proposed scope says liner from 4' to 66' (62 LF) — but there's a laundry tie-in at 2 ft. If the liner starts at 4 ft, the remote start covers 0–4 ft including that tie-in. After curing, the Clog Dog cuts the remote start out, leaving the tie-in at 2 ft fully open. That's actually a clean outcome — no reinstatement needed. **But the correct liner footage is 66 LF** (full run from the cleanout), not 62 LF. The remote start material costs money and the full footage is what gets billed. Just want to confirm you're good with that before I write the ticket. 2. What's the access type? Floor cleanout, stack, pit — and if it's a cleanout, is it a sweep or inline?

You

1. y 2. Front sweep. Easy

Flo

Perfect. Got everything I need. One note before the ticket: the proposed scope had 62 LF — I've corrected that to 66 LF. Remote start covers 0–4 ft, Clog Dog cuts it out after cure, tie-in at 2 ft stays fully open. Clean outcome, no reinstatement needed. Bill the full 66 ft. The 22.5° bends are mild and well-positioned (one near the start, one near the end). No flags on those. Minor roots from 6–40 ft are well within Flexshaft range and get cleared on liner day — standard prep. On liner selection: this is a 4"→6" transition run. Two good options: **Option A — Stretch liner:** Single pull, handles the 4"→6" transition on its own. Recommended given the transition — confirm exact footage add-on percentage with the install team lead before ordering. **Option B — Scrim + transition liner:** The 4" section is 6 ft, the 6" section is 60 ft. Looking at Marvel's transition liner stock, the **15/85/3** fits (15 ft ≥ 6 ft of 4", 85 ft ≥ 60 ft of 6") but has significant overage on both ends. The **12/60/3** is the tighter fit — 12 ft ≥ 6 ft of 4", 60 ft = 60 ft of 6" — right at the edge on the 6" side. Recommend adding a couple feet of buffer for the bend pullback at 60 ft, so **15/85/3** is the safer call if going scrim route. --- ```